LabelMate LD-100-RS

Mit den Etikettenspendern LD-100-RS und LD-200-RS entnehmen Sie die einzelnen Etiketten ganz einfach von der Rolle und kleben sie schliesslich aufs Endprodukt. Sobald Sie eine Etikette entnommen haben, wird automatisch die Nächste gespendet. Die Etikettenlänge können Sie ganz einfach mit dem optoelektronischen Sensor einstellen.
Die Etikettenspender überzeugen durch ihre Langlebigkeit und sehr robuste Bauweise.

Speziell für feuchte Umgebungen (Lebensmittelindustrie, Pharma, etc.) gibt es die Etikettenspender auch in einer Edelstahl-Variante.
Zu den Etikettenspendern sind ausserdem diverse Optionen erhältlich.

LD-100-RS Datenblatt

 

Den Etikettenspender gibt es in diversen Ausführungen und mit vielen Optionen:

P/N MODEL DESCRIPTION LABEL
WIDTH (mm)
LABEL LENGTH (mm)
LMD001 LD-100-RS Automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation! Up to 115 6 to 150*
Not for transparent labels.
Size: W x D x H: 210 x 200 x 270 mm.
LMD002 LD-200-RS Same features as LD-100-RS but with wider label capacity. Up to 165 6 to 150*
Size: W x D x H: 270 x 200 x 270 mm.
LMD003 LD-100-RS-SS Same features as LD-100-RS but in stainless steel. Up to 115 6 to 150*
Size: W x D x H: 210 x 200 x 270 mm.
LMD004 LD-200-RS-SS Same features as LD-200-RS but in stainless steel. Up to 165 6 to 150*
Size: W x D x H: 270 x 200 x 270 mm.
LMD005 LD-100-U Automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation! For transparent and black labels. Up to 115 10 to 150*
Size: W x D x H: 210 x 200 x 270 mm. 20 to 150*
  for transp.
LMD006 LD-200-U Same features as LD-100-U but with wider label capacity. Up to 165 10 to 150*
Size: W x D x H: 270 x 200 x 270 mm. 20 to 150*
  for transp.
LMD007 LD-100-U-SS Same features as LD-100-U but in stainless steel. Up to 115 10 to 150*
Size: W x D x H: 210 x 200 x 270 mm. 20 to 150*
  for transp.
LMD008 LD-200-U-SS Same features as LD-200-U but in stainless steel. Up to 165 10 to 150*
Size: W x D x H: 270 x 200 x 270 mm. 20 to 150*
  for transp.
LMD009 LD-100S Label Dispenser with variable speed control and foot switch. Ideal for very small or long labels. Up to 115 5 to unlim.
Size: W x D x H: 210 x 200 x 270 mm.
LMD010 LD-200S Same features as LD-100S but with wider label capacity. Up to 165 5 to unlim.
Size: W x D x H: 270 x 200 x 270 mm.

 

OPTIONEN:

P/N MODEL DESCRIPTION ROLL SPEED
DIAM(mm) (cm/sec)
LMX445 C-1 Counter option for all Label Dispensers LD-U & LD-RS.
LMX446 PC-1 Pre-set counter that will stop the label dispenser after a pre-set count is reached.
LMX447 LD-AWB Adjustable “wearless” brake system. Available on all models. Allows varying the roll tension to facilitate peeling of the labels. Increases the maximum roll diameter to 265 mm. 265
76mm standard. Available on request in 38, 40, 44, 50, 70 or 100mm.* Factory installed – replaces the standard nylon shaft.
LMX448 LD-FLANGES-220 Inner and outer Flange option for Label Dispenser (per pair). Fits all models (not compatible with LD-AWB). 220
Recommended for narrow labels.
LMX449 LD-FLANGES-300 Inner and outer Flange option for Label Dispenser (per pair). Fits all models (not compatible with LD-AWB). To be used with LD-DE. 300
Recommended for narrow labels.
LMX366 LD-DE Diameter extension: Allows using rolls with outer diameters up to 300mm (factory installed). 300
LMX367 LD-DE-SS Diameter extension: Allows using rolls with outer diameters up to 300mm (factory installed). Stainless steel version. 300
LMX537 PS-15V 220-240V – 50Hz DC Power Supply for LD. Output: 15V – 3A. Included with LD.
LMX056 PS-18V High-speed power supply to increase speed of the dispenser. 14
Minimum
LMX450 EXT. COMMAND The LD dispenses one label when receives a signal (contact closure).
Factory installed. Only for LD-RS / LD-U models.
LMX451 BATTERY PACK Complete kit to operate the LD on a battery. Includes: battery, charger and cables. Replace the standard power supply. Battery works for +/- 8 hours and needs 8 hours to re-charge.
Output: DC 12V.
Print